Utilization Of Coconut Fiber Ash Waste As An Added Material In Mortar

Feriansyah Maulana Ahsan; Nurul Rochmah

doi:10.55606/sscj-amik.v1i4.1576

Authors

Feriansyah Maulana Ahsan Universitas 17 Agustus 1945 Surabaya
Nurul Rochmah Universitas 17 Agustus 1945 Surabaya

DOI:

https://doi.org/10.55606/sscj-amik.v1i4.1576

Keywords:

Mortar, Compressive Strength, Coconut Fiber Ash

Abstract

Mortar is a mixture of materials composed of fine aggregate (sand), adhesives such as (clay, lime, portlaand cement) and water with a certain composition. Mortar can be affected by several specification factors such as density, mortar age, type of bonding material, and aggregate properties. In this study using coconut fiber ash as an added material in making mortar which has a function as an enhancer of compressive strength value in mortar. In coconut fiber ash, it has an important chemical compound for mortar, namely silica compounds which function as the main element to increase the compressive strength value of mortar. The purpose of the study was to determine the effect of adding coconut fiber ash material on the compressive strength of mortar with a percentage of 0%, 2.5%, 5%, 7.5%, 10%. From the results of the research conducted, a compressive strength value of 253 Mpa was obtained at a percentage of 10% of 7 days old and 253 Mpa at a percentage of 2.5% of 7 days old.

References

A. Maryoto. (2008), “Pengaruh Penggunaan High Volume Fly Ash Pada Kuat Tekan Mortar,” Tek. Sipil Perenc., vol. 10, no. 2, pp. 103–113.

A. Setiawan, A. B. Risman, Juliyatna, R. Fathurachman, and S. Octaviani S. (2015), “Beton Geopolimer Abu Serabut Kelapa,” J. Konstr., vol. 6, no. 2, pp. 91–97,.

ASTM. (2009), “Astm C29/C29M-07,” Standard Test Method For Bulk Density (' “Unit Weight”’) and Voids in Aggregate.

ASTM C33-03. (2003), “ASTM C33- 03 : Standard Spesification for Concrete Aggregate,” Annu. B. ASTM Stand., vol. 04, pp. 1–11.

ASTM, “ASTM C 136-06. (2006): Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates,” vol. 04.

B. Sutriono, R. Trimurtiningrum, and A. Rizkiardi. (2018), “Pengaruh Silica Fume sebagai Subtitusi Semen terhadap Nilai Resapan dan Kuat Tekan Mortar (Hal. 12-21),” RekaRacana J. Tek. Sipil, vol. 4, no. 4, p. 12, doi: 10.26760/rekaracana.v4i4.12.

B. Santosa, “Pemanfaatan Abu Serabut Kelapa (ASK). (2019) Sebagai Pengganti Sebagian Semen dengan Bahan Tambah Sikament-LN untuk Meningkatkan Kuat Tekan Beton,” J. Tek. Sipil, vol. 5, no. 1, pp. 22–39, doi: 10.28932/jts.v5i1.1310.

D. A. Fadlillah, F. Sustiawan. (2014), H. A. Lie, J. T. Sipil, F. Teknik, and U. Diponegoro, “Pengaruh Komposisi Nano Semen,” vol. 3, pp. 1031–1042.

F. Rahman. (2006), “Pengaruh Kehalusan Serbuk Pasir Silika Terhadap Kekuatan Tekan Mortar,” Info Tek., vol. 7, no. 2, pp. 56–66.

H. Taufik, B. Widya, and M. Muhandis. (2013), “Pengaruh Pemakaian Abu Serabut Kelapa (Ask) Sebagai Substitusi Semen Pada Mortar (The influence of coconut fiber’s ash as a cement substitution in mortar mixture),” J. Saintis, vol. 13, no. 2, pp. 1–12.

N. Rochmah, B. Sutriono, M. Beatrix, and D. Pertiwi. (2022), “Pengaruh Abu Sekam Sebagai Substitusi Semen Pada Kuat Tekan Flowing Concrete ( Nurul Rochmah ., Bantot Sutriono ., Michella Beatrix ., Dewi Pertiwi ),” vol. 10, no. 1, pp. 19–24.

SNI 03-6825-2002. (2002), “Sni 03-6825-2002,” Standar Nas. Indones. Metod. Penguji. kekuatan tekan mortar semen Portl. untuk Pekerj. Sipil.